RAPID INSTALL SYSTEM

Trough Load Tracker

Tru-Rivet Multi-Tool Kit

All Multi-Tool Complete Kits include the application tool, two Rivet Guide Blocks, two RNMDP-5 Rivet Drivers, two RNMH-4 Hammers (1.8kg), one BG-96 Belt Gauge, one SL-8 Lubricant Spray, and one tote bag.

For Use With For Use With For Use With
R2 through R5 with 6.4mm GAUGE ROD R5½, R6, with 11.1mm GAUGE ROD RC8 with 11.1mm GAUGE ROD
Number Number Number
TFT-MRNAT90M1 TFT-MRNAT90M2 TFT-MRNAT150-8M2
TFT-MRNAT105M1 TFT-MRNAT105M2 TFT-MRNAT180-8M2
TFT-MRNAT120M1 TFT-MRNAT120M2 TFT-MRNAT210-8M2
TFT-MRNAT135M1 TFT-MRNAT135M2
TFT-MRNAT150M1 TFT-MRNAT150M2
TFT-MRNAT180M1 TFT-MRNAT180M2
TFT-MRNAT210M1 TFT-MRNAT210M2

 

SPARE PARTS FOR INSTALLATION KIT

Trough Load Tracker

Tru-Rivet Multi-Tool Only

The Tru-Rivet Multi-Tool is designed and built with lightweight aluminium and ultra-high molecular weight (UHMW) polyethylene locator guides mounted directly on the top of the channel. Patented anvil plates set the rivets.

For Use With For Use With For Use With
R2 through R5 with 6.4mm GAUGE ROD R5½, R6, with 11.1mm GAUGE ROD RC8 with 11.1mm GAUGE ROD
Number Number Number
TFT-RNAT90M1 TFT-RNAT90M2 TFT-RNAT150-8M2
TFT-RNAT105M1 TFT-RNAT105M2 TFT-RNAT180-8M2
TFT-RNAT120M1 TFT-RNAT120M2 TFT-RNAT210-8M2
TFT-RNAT135M1 TFT-RNAT135M2
TFT-RNAT150M1 TFT-RNAT150M2
TFT-RNAT180M1 TFT-RNAT180M2
TFT-RNAT210M1 TFT-RNAT210M2
Trough Load Tracker

Guide Blocks

Tru-Nail Guide Blocks are available in 20-rivet and 40-rivet capacities. Lightweight, wear-resistant UHMW polyethylene and the pilot nail guides provide the most accurate placement of rivets in the belt splice.

5 Tru-Nail Guide Block 20 Rivets/Block 5 Tru-Nail Double-Wide Guide Block 40 Rivets/Block
For use with: R2, R3, R5, R5½, R6 For use with: R2, R3, R5, R5½, R6
Number Number
TFT-RNQL500 TFT-RNQL500DW
8 Tru-Nail Double-Wide Guide Block 32 Rivets/Block 8 Tru-Nail Double-Wide Guide Block 64 Rivets/Block
For use with: R8 For use with: R8
Number Number
TFT-RNQL800 TFT-RNQL800DW

 

Five-Prong Driver Rivet Punch with Safety Knob

Number: TFT-RNMDP5

The Five-Prong Driver drives five rivets at a time, but requires a 1.8kg to 2.2kg hammer. Rivets must be set after removal of the driver guides. For use with Guide Blocks, single- or double-wide.

 

Single Driver Punch with Cushion Grip

Number: TFT-RNSDP1

The Single Driver Punch with Cushion Grip is an amazing tool for driving rivets one at a time. Safe, easy, and accurate placement of the rivets in two to three blows can be done by a novice — and completely sets the rivet! For use with Guide Blocks, single- or double-wide.

Trough Load Tracker

Tru-Nail Release Tool

Only for use with Quickload Rivet Nails

Number
TFT- RNQL-500R

Pilot Nail Guide Replacement Strips

Number Description
TFT-RNGS5 5-Pilot
TFT-RNGS8 8-Pilot
Trough Load Tracker

Belt and Rivet Gauge

A gauge to use in selection of proper fastener and rivet.

Number
TFT-BG-96

Trough Load Tracker

Gauge Rod for Multi Tool

Number Description
TFT-RNGL1 6.4mm Gauge Rod – 19.05mm High
TFT-RNGL2 11.1mm Gauge Rod – 25.4mm High