FLAT RETURN TRACKERS

Tru-Trac ® Trackers are a patented design that offers the most reliable and effective conveyor belt tracking system available on the worldwide market. The center pivot is unique and simple, consisting of a stainless steel pin in a mild steel shaft, which is perpendicular to the plane of the belt, and its rubberised covered drum and tapered edge that ensures the tracker activates immediately as the belt moves off centre. The tracker continually reacts to keep the belt centred.

Tru-Trac ® Trackers are a patented design that offers the most reliable and effective conveyor belt tracking system available on the worldwide market. The center pivot is unique and simple, consisting of a stainless steel pin in a mild steel shaft, which is perpendicular to the plane of the belt, and its rubberised covered drum and tapered edge that ensures the tracker activates immediately as the belt moves off centre. The tracker continually reacts to keep the belt centred.

FLAT RETURN TRACKER

Available from 450mm – 1200mmPipe Structure brackets also available

  • Reliable Performance – The Tru-Trac ® Tracker has proven itself to be both robust, reliable, long lasting and provide effective performance in all condition.
  • Bearings – Uses a pair of 6017 2RS bearings, which due to the size of bearings are well within the load and RPM specifications, complete with a nylon bearing housing and plastic end caps.
  • Maintenance Free – Sealed bearings do not require any greasing.
  • Lagging – Covered with High Abrasive Natural Rubber, 12mm. Also available in Fire Retardant Polyurethane lagging.
  • Operates in all conditions – Quick activation on both wet and dry belts, both above and below ground.
  • Versatile Installation – Can be installed on the clean side of the belt, and then tension can be adjusted easily with the supplied mounting brackets. 
  • Reversing Belts – Excellent performance

                                                                                                                                

FLAT RETURN HEAVY DUTY TRACKER

Available from 1050mm – 1500mm (smaller sizes can be made to order) | Pipe Structure brackets also available

  • Heavy duty – Steel bearing housings are welded into the barrel with a reinforced solid shaft. 
  • Improved Rugged Sealing System – Steel End caps are pressed into the bearing housings, these also function as a ‘flinger’ seal to prevent ingress of material. 
  • Lagging – Covered with High Abrasive Natural Rubber, 12mm thick. Also available in Fire Retardant Polyurethane lagging.  
  • Also available in Extra Heavy Duty Tracker design.

                                                                                                                           

FLAT RETURN HEAVY DUTY THRUST TRACKER

Available from 1050mm – 1500mm (smaller sizes can be made to order) | Pipe Structure brackets also available

  • Heavy duty – Steel bearing housings are welded into the barrel with a reinforced solid shaft. 
  • Improved Rugged Sealing System – Steel End caps are pressed into the bearing housings, these also function as a ‘flinger’ seal to prevent ingress of material. 
  • Lagging – Covered with High Abrasive Natural Rubber, 12mm thick. Also available in Fire Retardant Polyurethane lagging.  
  • Also available in Extra Heavy Duty Tracker design.

                                                                                                                           

FLAT RETURN X-HEAVY DUTY TRACKER TURN X-HEAVY DUTY TRACKER

Available from 1600mm – 1650mm (smaller sizes can be made to order) | Pipe Structure brackets also available

  • Heavy duty – Steel bearing housings are welded into the barrel with a reinforced solid shaft. 
  • Improved Rugged Sealing System – Steel End caps are pressed into the bearing housings, these also function as a ‘flinger’ seal to prevent ingress of material. 
  • Lagging – Covered with High Abrasive Natural Rubber, 12mm thick. Also available in Fire Retardant Polyurethane lagging.  
  • Also available in Extra Heavy Duty Tracker design.

                                                                                                                           

FLAT RETURN EX-HEAVY DUTY TRACKER

Available from 1800mm – 2000mm (smaller sizes can be made to order) | Pipe Structure brackets also available

  • Heavy duty – Steel bearing housings are welded into the barrel with a reinforced solid shaft. 
  • Improved Rugged Sealing System – Steel End caps are pressed into the bearing housings, these also function as a ‘flinger’ seal to prevent ingress of material. 
  • Lagging – Covered with High Abrasive Natural Rubber, 12mm thick. Also available in Fire Retardant Polyurethane lagging.  
  • Also available in Extra Heavy Duty Tracker design.

                                                                                                                           

FLAT RETURN LOW-SPEED TRACKER 

Available from 450mm – 1200mm

  • Performance – Excellent and reliable performance on low speed
    conveyors.
  • No belt edge damage – The design ensures that no 90º contact with belt-edge occurs. As the belt moves off-centre the belt slides up the guide roll and causes tracker to activate quicker.
  • Available in Standard or Heavy Duty Tracker design.
  • Also available in XHD & EXHD designs for belt width 1600 – 1800.

                                                                                                                         

FLAT RETURN X-HEAVY DUTY LOW-SPEED TRACKER 

Available from 1600mm – 1650mm

  • Performance – Excellent and reliable performance on low speed
    conveyors.
  • No belt edge damage – The design ensures that no 90º contact with belt-edge occurs. As the belt moves off-centre the belt slides up the guide roll and causes tracker to activate quicker.
  • Available in Standard or Heavy Duty Tracker design.
  • Also available in XHD & EXHD designs for belt width 1600 – 1800.

                                                                                                                         

FLAT RETURN EX-HEAVY DUTY LOW-SPEED TRACKER 

Available from 1800mm – 2000mm

  • Performance – Excellent and reliable performance on low speed
    conveyors.
  • No belt edge damage – The design ensures that no 90º contact with belt-edge occurs. As the belt moves off-centre the belt slides up the guide roll and causes tracker to activate quicker.
  • Available in Standard or Heavy Duty Tracker design.
  • Also available in XHD & EXHD designs for belt width 1600 – 1800.

                                                                                                                         

DATA SHEETS

INSTALLATION INFO

APPLICATION PICTURES

Flat Return Tracker 1
Flat Return Tracker 2
Flat Return Tracker 3
Flat Return Tracker 4
Flat Return Tracker 5
Flat Return Tracker 6
Slow Return Tracker 1
Slow Return Tracker 2
Slow Return Tracker 3

MENU

INDUSTRY TRACKERS

FOOD INDUSTRY TRACKER

PACKAGING INDUSTRY TRACKER

TRACKER ADDITIONAL INFO

TRACKER FAQ

PRINCIPLES OF OPERATION

GUIDELINES FOR INSTALLATION

PRODUCT COMPARISON